MINI sílíkon vatnsheldur snertihnappur

Vatnsheldur háttvísisrofi er fáanlegur með hæð 3,1 mm, 3,5 mm, 4,2 mm, 5.0 mm, 5.2 mm. Lengdin er 6,2 mm og breiddin er 6,3 mm, það býður upp á U gerð fjögurra pinna, gegnum gat og yfirborðsfestingu

Hringdu í okkur

Lýsing

The waterproof tact switch is available with height of 3.1mm,3.5mm,4.2mm,5.0mm,5.2mm. The length is 6.2mm and width is 6.3mm,it offers U type four pin,through hole and surface mount.it's an ideal application for digital products and beauty instruments and so on.such as the e-cigarette,earphone,Blood pressure monitor, massage machine.

Forskrift

Stærð: 6.26.33.5mm
Vöruflokkur: Áþreifanleg rofi
Virkni: augnablik og vatnsheldur
Uppbygging: kísillgúmmí

Kostur

Lítil stærð
IP67 Level Vatnsheldur aðgerð
Fjölbreytt hæðarvalkostur

Teikning og stærð

Rafmagnslýsing

NEI.	Hlutir	Test conditions	Kröfur
1	Contact resistance	Shall be measured at 10mA 5VDC by voltage drop method after some operations without load. Applied position: Between terminal and terminal	100mΩ MAX
2	Insulation resistance	Test voltage:100VDC, measured after 1 min ±5s Applied position: 1)Between terminal and terminal 2)Between terminal and ground	100MΩ MIN
3	Dielectric voltage proof	Following test voltages shall be applied for 1 min. (Cut{{0}}off current:0.5mA) 1)Between terminal and terminal : 250VAC (5060Hz)	No dielectric breakdown shall occur.
4	Contact bounce	Lightly striking the center of the stem a t a rate encountered in normal use (3 to 4 times per second), and bounce shall be tested at "ON" and "OFF"	ON-5msec.max OFF-10msec.max